Restoring The Factory Settings (Factory Reset) - Roland XV-5050 Owner's Manual

Restoring the Factory Settings
(Factory Reset)
To ensure the XV-5050 operates correctly as described in the procedures found in the
Owner's Manual when using the XV-5050 for the first time, be sure to restore the
settings to their initial status as shipped.
fig.Reset
1.
Press [UTILITY] to make its indicator light.
The UTILITY screen appears in the display.
fig.05-02
2.
Press [ CURSOR] a few times to move the cursor to the upper left
of the display.
3.
Turn [VALUE] to choose "FACTORY RESET."
fig.ResetScreen
4.
Press [ENTER].
The confirmation message "Are You Sure?" appears in the display.
fig.Sure
* To cancel, press [EXIT]
5.
Press [ENTER] to execute the factory reset.
The PLAY screen returns to the display.
* If the following display appears, turn [VALUE] to change the displayed ON to OFF. After
pressing [ENTER] to turn off the protect, press [ENTER] again to save the settings.
fig.05-01
3 2
Getting Ready
1
4, 5
If any important data you
may have created is stored
in memory, then running
this operation will cause
such data to be lost. If there
is any data you wish to
retain, then save the data to
a commercially available
memory card or external
MIDI device.
For more information on
Write Protect, refer to page
105.
15