Assigning a New Patch to a Part
Here's how to change the Patch assigned to a Part in a Performance.
We'll change the patch assigned to Part 2 of Performance "PA:001 Seq:Template" to
"PB:018 Slap Bass 1."
On the PERFORM PLAY screen, choose Performance "PA:001 Seq:Template."
1.
Press [PERFORM] and [PATCH] to make their indicators light.
The patch assigned to the current part appears.
fig.00-10
2.
Press [
PART]/[PART
fig.00-11
3.
Turn [VALUE] to choose "018 Slap Bass 1."
4.
Press [PERFORM] to return to the PERFORM PLAY screen.
Changing the MIDI Reception Channel of Each Part
On the PERFORM PLAY screen, choose the Performance you wish to use.
1.
Press [EDIT] to make its indicator light.
2.
Press [
CURSOR] a few times to move the cursor to the upper line
of the display.
3.
Turn [VALUE] to choose "MIDI."
4.
Press [CURSOR
display.
5.
Turn [VALUE] to choose "Rx Channel."
6.
Press [
PART]/[PART
fig.00-12
7.
Press [CURSOR
display.
8.
Turn [VALUE] to choose the desired MIDI channel.
9.
Press [EXIT] to return to the PERFORM PLAY screen.
] to choose Part 2.
] to move the cursor to the lower left of the
] to choose the Part you wish to set.
] to move the cursor to the lower right of the
Playing Sounds
Phrase Preview feature is also
available in Performance
mode. The patch on the current
part will sound.
You can play multiple Parts
— and their Patches —
simultaneously by setting
them to the same MIDI
reception channel.
27