Setting Procedure - Roland XV-5050 Owner's Manual

Setting Procedure

You can set the direct sound's output method and the amount of
effect applied for each Tone or Rhythm Tone individually.
1. Choose the Patch/Rhythm Set you wish to use.
2. Press [EDIT] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
parameter group in the upper line of the display.
4. Turn [VALUE] to choose "EFFECTS."
5. Press [CURSOR
] to move the cursor to the parameter.
6. Turn [VALUE] to choose the parameter you want to set.
7. Choose the Tone/Rhythm Tone for which you want to make
settings.
Parameter
EFFECTS
Output Asgn Tone Output Assign
Output Level Tone Output Level
Chorus Send Tone Chorus Send Level
Reverb Send Tone Reverb Send Level
• When the Output Assign parameter (p. 40)/(p. 55) is set to
anything but TONE, the setting made here has no effect.
• When the Struct Type (PATCH:COMMON) parameter has a
setting of Type 2–10, the outputs of Tones 1 and 2 will be
combined with Tone 2, and the outputs of Tones 3 and 4 will be
combined with Tone 4. For this reason, the setting of Tone 1 will
follow the setting of Tone 2, and the setting of Tone 3 will follow
the setting of Tone 4 (p. 41).
• When outputting in mono, the Pan setting is disabled.
• Chorus and Reverb are output in mono at all times.
• When the settings are such that signals are split and output from
the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is
inserted in the INDIVIDUAL 2 jack, the sounds from
INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then
output from the INDIVIDUAL 1 jack. This sound comprises the
sounds from the INDIVIDUAL 1 and 2 jacks.
If the Mix/Parallel parameter (SYSTEM:GENERAL) is set to
MIX, all sounds are output from the OUTPUT A (MIX) jacks in
stereo (p. 107).
Value Description
MFX, OUTPUT A/B, Sets the direct sound's output method for each Tone or Rhythm Tone.
INDIV 1–4
MFX: Output in stereo through Multi-effects. You can also apply Chorus or Reverb to the sound that
passes through Multi-effects.
OUTPUT A/B: Output to the OUTPUT A (MIX) / B jacks in stereo without passing through Multi-
effects.
INDIV 1–4: Output to the INDIVIDUAL 1–4 jack in mono without passing through Multi-effects.
0–127 Sets the direct sound's volume for each Tone or Rhythm Tone. When Multi-effects are be-
ing applied, this sets the amount of the effect that is applied; when Multi-effects are not
applied, this sets the volume of the direct sound.
0–127 Sets the chorus depth for individual Tone/Rhythm Tone. If you don't want to add the
Chorus effect, set it to 0.
0–127 Sets the reverb depth for individual Tone/Rhythm Tone. If you don't want to add the Re-
verb effect, set it to 0.
Chapter 4 Using the XV-5050 Effects
For more information on how to choose Tone/Rhythm Tone,
refer to pages 39 and 56.
8. Press [CURSOR
] to move the cursor to the value.
9. Turn [VALUE] to select the desired setting.
10.Press [EXIT] to return to the PATCH/RHYTHM PLAY screen.
A "*" symbol appears at the left of the Patch/Rhythm Set name,
indicating that its settings have been changed.
If you turn off the power or choose another Patch/Rhythm Set
while the "*" symbol is displayed, your new Patch/Rhythm Set
settings will be lost. If you wish to preserve them, save the
changed Patch/Rhythm Set using the Write operation. (p. 104)
For more on how to set each effect, refer to the pages shown
below.
• Multi-effects -> (p. 74, pp. 75–101)
• Chorus -> (p. 74, p. 102)
• Reverb -> (p. 74, p. 103)
71