Using Freemidi On The Macintosh; Installing The Xv-5050 Driver - Roland XV-5050 Owner's Manual

Installing & Setup the Driver

Using FreeMIDI on the Macintosh

Installing the XV-5050 Driver

Use the following procedure to install the XV-5050 driver.
* Disconnect the XV-5050 from your Macintosh before installing the driver.
* Exit all applications before you begin installing the driver.
* The XV-5050 FreeMIDI Driver included on the disc is provided as an additional module
that allows the XV-5050 to be used with FreeMIDI. In order to use it, FreeMIDI must
already be installed on the start-up hard disk.
1.
In the "XV-5050 Driver E" folder of the CD-ROM, double-
click the "FM-E" icon.
2.
Make sure that FreeMIDI is already installed
in the location where the driver will be
installed, and click [Install].
3.
When installation is completed, click
[Restart] to restart your Macintosh.
This completes installation of the XV-5050 Driver.
Next you will make FreeMIDI settings.
134
You can download
FreeMIDI from the Web
site of Mark of the Unicorn,
Inc.
About detailed information
for FreeMIDI, refer to the
owner's manual of
FreeMIDI.