Setting Procedure - Roland XV-5050 Owner's Manual

Setting Procedure

Here, set the way the direct sound is output and the amount of each
effect to be applied. The settings made here determine whether or
not the signal passes through the Multi-effects, the jack used to
output the sound, and the type of output (stereo or mono).
1. Choose the Performance Set you wish to use.
2. Press [EDIT] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
parameter group in the upper line of the display.
4. Turn [VALUE] to choose "EFFECTS."
5. Press [CURSOR
] to move the cursor to the parameter.
6. Turn [VALUE] to choose the parameter you want to set.
Parameter
EFFECTS
Output Asgn Part Output Assign
Output Level Part Output Level
Chorus Send Part Chorus Send Level
Reverb Send Part Reverb Send Level
Output Select Part Output MFX Select
• When outputting in mono, the Pan setting is disabled.
• Chorus and Reverb are output in mono at all times.
• When the settings are such that signals are split and output from
the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is
inserted in the INDIVIDUAL 2 jack, the sounds from
INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then
output from the INDIVIDUAL 1 jack. This sound comprises the
sounds from the INDIVIDUAL 1 and 2 jacks.
If the Mix/Parallel parameter (SYSTEM:GENERAL) is set to
MIX, all sounds are output from the OUTPUT A (MIX) jacks in
stereo (p. 107).
When the Output Assign parameter is set to PATCH, the output
level settings for the Patch or Rhythm Set as well as the Part go
into effect. If you want the various level settings of the Patch/
Rhythm Set to be reflected as they are, set the various Part levels
to 127 (maximum).
Value Description
MFX, OUTPUT A/B, Sets the direct sound's output method for each Part.
INDIV 1–4, PATCH
MFX: Output in stereo through Multi-effects. You can also apply Chorus or Reverb to the sound that
passes through Multi-effects.
OUTPUT A/B: Output to the OUTPUT A (MIX)/B jacks in stereo without passing through Multi-ef-
fects.
INDIV 1–4: Output to the INDIVIDUAL 1–4 jack in mono without passing through Multi-effects.
PATCH: The Part's output destination is determined by the settings of the Patch or Rhythm Set as-
signed to the Part.
0–127 Sets the direct sound's volume for each Part.
0–127 Adjusts the amount of Chorus for each Part. If you don't want to add the Chorus effect, set
it to 0.
0–127 Adjusts the amount of Reverb for each Part. If you don't want to add the Reverb effect, set
it to 0.
MFX-A–C Selects which of the three Multi-effects is to be used.
Chapter 4 Using the XV-5050 Effects
7. Press [
PART]/[PART
you want to make settings.
8. Press [CURSOR
] to move the cursor to the value.
9. Turn [VALUE] to select the desired setting.
10.Press [EXIT] to return to the PERFORM PLAY screen.
A "*" symbol appears at the left of the Performance name,
indicating that its settings have been changed.
If you turn off the power or choose another Performance while
the "*" symbol is displayed, your new Performance settings will
be lost. If you wish to preserve them, save the changed
Performance using the Write operation. (p. 104)
For more on how to set each effect, refer to the pages shown
below.
• Multi-effects -> (p. 74, pp. 75–101)
• Chorus -> (p. 74, p. 102)
• Reverb -> (p. 74, p. 103)
] to choose the Part for which
73