Adjusting Effect Settings; Saving Patches You Create; Copying Settings Between Patches (Patch Tone Copy) - Roland XV-5050 Owner's Manual

Adjusting Effect Settings

Refer to "Patch/Rhythm Set Mode Settings" (p. 70).

Saving Patches You Create

Refer to "Saving a Patch" (p. 104).
Copying Settings Between
Patches (Patch Tone Copy)
Tone settings from a Patch can be copied to the currently selected
Patch. You can use this feature to make the Patch-editing process
faster and easier.
1. Make sure that a Patch is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
upper left of the display.
4. Turn [VALUE] to choose "COPY TONE."
5. Press [CURSOR
] twice to move the cursor to the lower
right of the display.
6. Turn [VALUE] to choose the Patch containing the settings
you wish to copy.
"TEMP" means the currently selected Patch.
7. Use [
CURSOR]/[CURSOR
the Tone containing the settings you wish to copy (From),
and the Tone to which you want to copy the settings (To).
8. Press [ENTER] to execute the Copy.
* To cancel, press [EXIT].
9. Press [EXIT] to return to the PATCH PLAY screen.
A "*" symbol appears at the left of the Patch name, indicating
that the Copy has been executed.
] and [VALUE] to choose
Chapter 1 Creating a Patch
Patch Name Copy
You can copy the name of a Patch to the currently selected
Patch.
1. Select the Patch whose name you wish to change.
2. Press [UTILITY] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to
the upper left of the display.
4. Turn [VALUE] to choose "COPY NAME."
5. Press [CURSOR
] to move the cursor to the lower
right of the display.
6. Turn [VALUE] to choose the Patch whose name you
wish to copy.
7. Press [ENTER] to execute the Copy.
* To cancel, press [EXIT].
8. Press [EXIT] to return to the PATCH PLAY screen.
53