Playing Sounds
The XV-5050 comes with a rich palette of onboard sounds, called "Patches." Let's
listen to some Patches in Patch mode.
Playing Patches (Phrase Preview)
Even when there's no MIDI keyboard or sequencer connected, the XV-5050 allows
you to audition sounds using a number of prepared phrases that are perfectly
matched to each Patch (category).
fig.0-01
3
1.
Press [PATCH] to make its indicator light.
The PATCH PLAY screen appears in the display.
fig.00-01
2.
Turn [VALUE] to choose a Patch.
3.
Press and hold down [VOLUME].
The Patch plays while [VOLUME] is depressed.
Setting the Way In Which Sounds Are Previewed
You can preview a Patch in any of three ways: "PHRASE" (the Patch plays a phrase),
"CHORD" (the Patch plays a chord), or "SINGLE" (the Patch plays a series of notes).
fig.0-02
1.
Press [SYSTEM] to make its indicator light.
2.
Press [
CURSOR] a few times to move the cursor to the parameter
group in the upper line of the display.
fig.00-02
3.
Turn [VALUE] to choose "PREVIEW."
18
2
1
8
3, 5, 7
2
4, 6
1