Table of Contents
Advertisement
Choosing the Tones That Sound
(Tone On/Off)
Here's how to turn on the Tones that you want to hear in a Patch.
You can also use the on/off technique described in this section to
audition an individual Tone by turning off all the other Tones in a
Patch.
fig.1-03
4
3
1. Make sure that the PATCH PLAY screen is displayed.
2. Choose the Patch you wish to use.
3. If [TONE]'s indicator lights, press [TONE] to make its
indicator dark.
4. Press TONE SW [1]–[4] to turn the corresponding Tone on
so that its indicator lights, or off so that its indicator goes
dark.
Settings Common to the Entire
Patch (COMMON)
How to adjust a Patch setting, or "parameter":
1. Choose the Patch you wish to use.
2. Press [EDIT] to make its indicator light.
3. Press [
CURSOR] a few times to move the cursor to the
parameter group at the upper line of the display.
Parameter Group
Parameter
4. Turn [VALUE] to choose "COMMON."
5. Press [CURSOR
] to move the cursor to the parameter.
6. Turn [VALUE] to choose the parameter you want to set.
7. Press [CURSOR
] to move the cursor to the value.
8. Turn [VALUE] to choose the desired value.
9. Press [EXIT] to return to the PATCH PLAY screen.
A "*" symbol appears at the left of the Patch name, indicating
that its settings have been changed.
fig.1-05
If you turn off the power or choose another Patch while the "*"
symbol is displayed, your new Patch settings will be lost. If you
wish to preserve them, save the changed Patch using the Write
operation. (p. 104)
Value
Chapter 1 Creating a Patch
Selecting a Tone for Editing
(Tone Select)
Some parameters can be set independently for each Tone in a Patch.
fig.1-03
3
2
1. Make sure that the PATCH EDIT screen is displayed.
2. Press [TONE] to make its indicator light.
3. Press TONE SW [1]–[4] to choose the Tone you wish to set
up.
Its indicator lights, and the chosen Tone's number appears in the
upper right of the display.
fig.1-05
39
Hide quick links:
Advertisement
Table of Contents
