Settings Common To An Entire Rhythm Set - Roland XV-5050 Owner's Manual

Settings Common to an Entire Rhythm Set

Setting Procedure:
1. Hold down [SHIFT] and press [PATCH] to make its indicator blink.
The XV-5050 enters Rhythm Set mode.
2. Choose the Rhythm Set you wish to use.
3. Press [EDIT] to make its indicator light.
4. Press [
CURSOR] a few times to move the cursor to the parameter group at the upper line of the display.
fig.2-03.e
Parameter Group
Parameter
5. Turn [VALUE] to choose "COMMON."
6. Press [CURSOR
] to move the cursor to the parameter.
7. Turn [VALUE] to choose the parameter you want to set.
8. Press [CURSOR
] to move the cursor to the value.
9. Turn [VALUE] to choose the desired value.
10.Press [EXIT] to return to the RHYTHM PLAY screen.
A "*" symbol appears at the left of the Rhythm Set name, indicating that its settings have been changed.
fig.2-04
If you turn off the power or choose another Rhythm Set while the "*" symbol is displayed, your new Rhythm Set settings will be lost. If you
wish to preserve them, save the changed Rhythm Set using the Write operation. (p. 104)
Parameter
COMMON
Name Rhythm set name
Level Rhythm set level
Output Asgn Rhythm output
assign
Clock Source Rhythm set clock
source
Tempo Rhythm set tempo
Value
Value
space, A–Z, a–z, 0–9, ! " # $ % & ' ( ) *
+ , - . / : ; < = > ? @ [ ¥ ] ^ _ ` { | }
0–127
MFX, OUTPUT A/B, INDIV 1–4,
TONE
RHYTHM, SYSTEM
20–250
Chapter 2. Creating a Rhythm Set
Description
You can name a Rhythm Set using up to 12 alphanumeric characters. Use
[ CURSOR]/[CURSOR ] to move the cursor, and then turn the [VALUE]
knob to select the desired character.
This sets the overall volume of the Rhythm Set.
* To set the volume of each Rhythm Tone, use the Tone Level (TVA p. 61).
This sets the output destination of the Rhythm Set.
MFX: The Rhythm Set is sent into the Multi-Effects.
OUTPUT A/B: The Rhythm Set is sent to the selected pair of OUTPUTs, A or B.
INDIV 1–4: The Rhythm Set is sent to the selected INDIVIDUAL output jack, 1-4.
TONE: Each Rhythm Tone in the Rhythm Set is sent to its programmed output
destination.
The LFO cycle, M-FX changes, phrase loop (break beats), and Tone delay time can
be synchronized to a clock, or tempo. The Clock Source setting selects the timing
reference to be used by the Rhythm Set.
RHYTHM: The Rhythm Set Tempo will be used.
SYSTEM: The global System Tempo or clock messages received from an exter-
nal sequencer will be used.
When Clock Source is set to "RHYTHM," this setting establishes the Rhythm Set's
tempo.
* Clock messages for the Rhythm Tempo are not transmitted from the MIDI OUT
jack.
55