Table of Contents
Advertisement
To Add a IPX SAP Filter for a path [click] the ADD button.
To Edit a IPX SAP Filter for a path [click] the EDIT button.
To Delete a IPX SAP Filter for a path, [click] on the path to highlight it and
[click] the DELETE button.
Insert the Server Names where Access is Allowed from this path.
RIP/SAP OPERATION
Reject All
Send Only
Listen Only
Send & Listen
Note: If no entry is made in these tables, the entire network will be
accessible to all Authenticated connections from the particular path.
If only one address/or filter is entered that will be the limitation of
access.
O
C
S
UTGOING
ALL
UPPORT
This facility adds further security protection
by limiting the transmission of RIP and SAP
frames across a path. [Click] on the selection
required from the list:-
Rejects all RIP and SAP frames, ONLY to
be used for static routes.
Only Sends RIPs and SAPs (Except where
specifically filtered). Needs Static Routes
to be established.
Only accepts RIPs and SAPs, does not
broadcast them remotely. Needs Static
Routes to be established.
Broadcasts and Receives RIPs an SAPs,
except those filtered above. This allows
automatic learning of the addresses and
hence does not require Static Routes.
R
EFERENCE
2-27
Advertisement
Table of Contents
