Port Utilization; Statistics - D-Link xStack DES-3200 Series Reference Manual

Port Utilization

Users can display the percentage of the total available bandwidth being used on the port.
To view this window, click Monitoring > Utilization > Port Utilization as shown below:
The fields that can be configured are described below:
Parameter
Port
Time Interval
Record Number
Show/Hide
Click the Apply button to accept the changes made for each individual section.

Statistics

xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 11-2 DRAM & Flash Utilization window
Figure 11-3 Port Utilization window
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Check whether or not to display Utilization.
257