Authentication Server Group - D-Link DES-1228/ME User Manual

Parameter
Application
Login Method List
Enable Method List
Click Apply to implement changes made.

Authentication Server Group

This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used to group
TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using method lists. The
user may define the type of server group by protocol or by previously defined server group. The Switch has four built-in Authenti-
cation Server Groups that cannot be removed but can be modified. Up to eight authentications server hosts may be added to any
particular group.
To view the following window, click Security > Access Authentication Control > Authentication Server Group:
This window displays the Authentication Server Groups on the Switch. To modify a particular group, click its hyperlinked Group
Name, which will then display the following window.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Description
Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for users utilizing the Console (Command
Line Interface) application, the Telnet application, SSH and the WEB (HTTP) application.
Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Login Method Lists window, in this
section, for more information.
Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Enable Method Lists window, in this
section, for more information
Figure 10- 30. Authentication Server Group window
174