System > Port Configuration > Port Settings - D-Link DMS-1100-10TS User Manual

The fields that can be configured for System Information are described below:
Item
System name
System Location
System Contact
Click Apply to make the configurations take effect.
System > Port Configuration > Port Settings
In the Port Settings page, the status of all ports can be monitored and adjusted for optimum configuration.
The fields that can be configured for Port Settings are described below:
Item
From Port / To Port
Media
State
Flow Control
Duplex
Figure 4.27 – System > System Information
Description
Enter the system name to be specified.
Enter the system location to be specified.
Enter the system contact to be specified.
Table 4.12
Figure 4.28 – System > Port Configuration > Port Settings
Description
Select the appropriate port range to be configured.
Select the media type for specified port. The media type is Copper for
port 1 ~ port 8 and Fiber for port 9 ~ port 10.
Enable or disable the physical port.
Select On or Off. Ports configured for full-duplex use 802.3x flow
control, half-duplex ports use back-pressure flow control, and Auto
ports use an automatic selection of the two.
Select the duplex mode used. Options to choose from are Auto and
28
D-Link DMS-1100 Series User Manual