Installing The Cx-Simulator - Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual

Installing and Uninstalling the Software

2-1-4 Installing the CX-Simulator

28
can be confirmed by selecting Start - Settings - Control Panel - System.
The service pack will be displayed under System on the General Tab Page
of the System Properties Dialog Box. If a service pack is not displayed, no
service pack has been installed. Refer to Microsoft's website for service
pack installation methods.
It may be necessary to restart Windows after finishing the installation. If
•
required, restart Windows according to the messages displayed by the In-
staller.
Note
Internet Explorer version 5.0 or higher must be installed in advance to use
the CX-Server Installer. Install Internet Explorer version 5.0 in advance if it is
not already installed.
1,2,3... 1. Insert the CX-Simulator installation disk (CD-ROM) into the CD-ROM drive.
2. The setup program will start automatically and the Choose Setup Lan-
guage Dialog Box will be displayed.
The language of the operating system running on the computer will be se-
lected automatically.
If the above dialog box is not displayed, double-click the CD-ROM drive from
the Explorer to display it.
Select the language to be installed and click the OK button.
3. A splash window for the CX-Simulator will be displayed, followed by the
Setup Wizard.
Section 2-1