Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 280

Error Processing
Symptoms
Failed to start FinsGateway.
FinsGateway may have been
installed incorrectly or the set-
tings are invalid.
Failed to start I/O Condition Tool. Poor resource for
Failed to start Log display appli-
cation.
Failed to start the Alarms display
application.
Failed to start Virtual Communi-
cations Unit.
Failed to switch the current UM.
Failed to gain the access rights of
CX-Simulator Ladder Engine.
The node address of FinsGate-
way -- unit is duplicated. Change
the node address of FinsGateway
communications unit to start.
The program is running. Cannot
set a start point.
Unable to allocate the network
number since the number of
registered network in the Fins-
Gateway routing table is maxi-
mum. Delete the unused network
then reconnect.
Unexecuted Cyclic task cannot
be changed to WAIT mode.
Unit profile does not exist or the
file format is invalid.
Causes
Wrong execution Re-install the CX-Programmer and the CX-Server, or
environment. FinsGateway.
1. Exit executing application programs excluding the
executing or
wrong execution 2. Uninstall and then reinstall the CX-Simulator.
environment.
Wrong execution 1. Exit executing application programs excluding the
environment.
2. Uninstall and then reinstall the CX-Simulator.
Wrong environ- The event viewer is not working for Windows NT and
ment for the the memo pad for Windows95/98. Change the OS
Alarms display settings so as to work.
application.
Wrong execution Uninstall and then reinstall the CX-Simulator.
environment.
Another applica- After the application program being writing is com-
tion program is pleted, try again.
writing to the UM.
1. Change the FINS node address of the commu-
2. Change the duplicated node address using net-
Tried to set a start A start point can be set only when stopping (Program
point while running mode).
the program.
Reset the routing table using the CX-Integrator.
Tried to change a Try again after executing the program.
Cyclic task in INI to
WAIT mode.
Wrong execution Uninstall and then reinstall the CX-Simulator.
environment.
Remedies
CX-Simulator and try again.
CX-Simulator and try again.
nications path in the [Work CX-Simulator] win-
dow.
work communications setting.
Section 10-1
241