Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 193

Connection with Application Programs
154
5. Set the FINS address displayed in the [Guide to Connect] to the target
FINS address of the application program.
If the node address set by the application program can not be changed,
•
change the node address of the network communications unit in the
[System Status] | [Settings] | [Network Communications Settings] window.
6. Start the CX-Programmer on the computer where the CX-Simulator was
started to select CX-Integrator (network settings) in the [Tool] menu, dis-
playing CX-Net.
Section 7-2