System Status Setting Window
66
1,2,3... 1. Selecting [UM Settings] in the [System Status Setting] | [Settings] menu will
display the [UM Settings] window.
UM Access Enable
•
UM Execution Enable
•
OK
•
Cancel
•
2. Click the [OK] button when UM setting is completed.
Note Refer to 8 Debugging Using Virtual External Inputs for how to use the UM2.
Set the UM for downloading/uploading and
editing online by the CX-Programmer.
Set whether to execute programs on the UM
(enable) or not. Disabling both of UM1 and UM2
simultaneously is not possible.
Save the current settings and exit the window.
Discard the current settings and exit the win-
dow.
Section 3-7