Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 249

I/O Memory Allocation
Address
Words Bits
A295 A29508 Instruction
Processing
Error Flag
A29509 Indirect
DM/EM
BCD Error
Flag
210
Name
This flag and the Error Flag (ER)
will be turned ON when an in-
struction processing error has
occurred and the PLC Setup has
been set to stop operation for an
instruction error. CPU Unit op-
eration will stop and the
ERR/ALM indicator will light when
this flag goes ON.
(The task number where the error
occurred will be stored in A294
and the program address will be
stored in A298 and A299.)
This flag and the Access Error
Flag (AER) will be turned ON
when an indirect DM/EM BCD
error has occurred and the PLC
Setup has been set to stop op-
eration an indirect DM/EM BCD
error. (This error occurs when the
content of an indirectly addressed
DM or EM word is not BCD al-
though BCD mode has been
selected.) CPU Unit operation will
stop and the ERR/ ALM indicator
will light when this flag goes ON.
(The task number where the error
occurred will be stored in A294
and the program address will be
stored in A298 and A299.)
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
1: Error Same as
Flag CS/CJ-series
ON PLC.
0: Error
Flag
OFF
1: Not BCD Same as
CS/CJ-series
0: Normal PLC.
Section 9-3
Settings