Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 292

How to Use Data Trace Recording Tool
Explanation for Each Part of the Window
Names and Functions
Target PLC to
Trace
Sampling
interval
Trace Data
Record file
Trace Status
Write settings
button
Read settings
button
Item
Target PLC to Specify the FINS address for the PLC where data tracing will be
Trace performed.
Only network/node address can be input.
Sampling Area Register addresses where bits and words are sampled.
[Edit]: Edit bit/word addresses in the Sampling Address Setting
window.
Set at least one to either of bits or words within the range on the
right.
Sampling interval Set the sampling conditions with the radio button.
Interval Set the sampling interval as "fixed" and enter the interval in the
text box (unit: ms).
Per cycle Trace per cycle of the ladder program.
Abort Value Specify the value for exiting the data tracing.
Type Specify either of after getting specified number of samples or
after specified time elapsed.
Samples Specify the value for exiting the data tracing.
Trace Specify the time for tracing.
elapsed
Unit Specify the unit for the time above: either of second, minute, or
hour.
Trace Data Record Specify the file name for saving the sampling data: either in a
File relative path or in an absolute path.
Browse Display the File Name Setting dialog.
Options settings Set options regarding trace data saving.
Description
Appendix
Sampling Area
Abort Value
Options button
Start button
Exit button
Limit of values
Network: 0 to 127
Node: 1 to 126
Unit: 0(fixed)
Number of bits: 0 to 31
Number of words: 0 to 6
10 to 2550
1 to 65535
1 to 65535
A network name can not
be specified.
253