Plc Operation Settings - Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual

System Status Setting Window

3-7-6 PLC Operation Settings

68
The [PLC Operation Settings] window allows to set for PLC operation.
1,2,3... 1. Selecting [PLC Operation Settings] in the [System Status Setting] | [Set-
tings] menu will display [PLC Operation Settings] window.
Replay from the top of the
•
same scan after online...
Disable Cycle time
•
watching
DIP Switch Settings
•
UM Automatic Boot
•
User Switch
•
OK
•
Cancel
•
2. Click the [OK] button when setting is completed.
Set whether or not to enable online edit when
Scan Replay/Step Run.
Disable the watchdog timer (WDT). The Watch
Cycle Time in the PLC Setup and the WDT
instruction setting are disabled. When disabled,
a CPU error will not occur even if the cycle time
exceeds the setting.
Set the equivalent setting to the DIP switches of
the CPU Unit.
Set to read Autoexec file automatically when
the power turns ON (When the Ladder Engine
is started.).
Set the DIP Switch (A39512) for
User-customization.
Save the current settings and exit the window.
Discard the current settings and exit the win-
dow.
Section 3-7