Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 5

About Upgrades:
Version 1.1
The following functions have been added to the CX-Simulator with the upgrade from Version 1.0 to
Version 1.1.
Actual Serial Communications Possible
NT Link (1:N Mode) Possible
Multipoint Data Collection Tool Added
WindowsMe/2000 Supported
Serial Number Entry on Installing Added
Version 1.2
The following functions have been added to the CX-Simulator with the upgrade from Version 1.1 to
Version 1.2.
New PLCs Supported
Functionality Improved
vi
In Ver.1.0, the contents of messages sent by serial communications instruc-
tions are displayed on the computer screen. In Ver.1.1, actual serial com-
munications to an external serial communications device connected to a COM
port on the computer are also possible.
In Ver.1.1, communications with OMRON's Programmable Terminal (PT)
connected to a COM port on the computer via NT Link are possible.
Time-series I/O memory data acquired from the actual PLC can be saved as a
Data Replay File (CSV format). Unlike Data Trace, data can not be acquired
every cycle. However, data of more than 50 words can be acquired.
Simulation is newly supported for the following PLCs.
Series
CS CS1H-CPU67H/66H/65H/64H/63H
CS1G-CPU45H/44H/43H/42H
CJ CJ1H-CPU66H/65H
CJ1G-CPU45H/44H/43H/42H
CJ1G-CPU45/44
The following functions have been improved so that the same operation as
that performed by the actual PLC is performed by the CX-Simulator. (There
were some differences in operation with version 1.1.)
•
Processing when using index registers for automatic incrementing or
decrementing with sequence output instructions.
• Processing the current EM bank is changed during execution of the ladder
program.
•
Break processing for nested FOR-NEXT loops.
•
Processing for decrementing counters in certain ladder program struc-
tures.
CPU Unit model numbers