Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 101

System Status Setting Window
Status Display LED
LED
RUN
ERR/ARM
COMM.
NETWORK
Setting Menu
Name
Select PLC
Register PLC Unit
Network comms settings
Serial comms settings
UM Settings
PLC Clock Settings
PLC Operation Settings
Initialize PLC
62
Display Status
CS/CJ/CP-series PLC
Lit (Green)
Blink (Green)
Not lit
Lit (Red)
Blink (Red)
Not lit
Blink (Yellow)
Not lit
−
−
Pressing the [Settings] Menu button displays the setting menu.
Create a new PLC (the PLC Setting wizard) and select an existing
PLC.
Set the unit mounting to PLC.
Set for the Network Communications Unit.
Set for the Serial Communications Unit.
Set for the UM.
Set the cycle time mode, the interval for continuous run, and others.
Set WDT disable, DIP switches, and others.
Initialize the I/O memory of PLC.
CX-Simulator
Green Executing programs in RUN/
MONITOR mode.
−
Mode error in system downloading
(Not used)
White Error stop in the PROGRAM mode.
Red Fatal error/Non-fatal error/Ladder
Engine error
White Normal
Yellow Comm. Port sending/receiving (not
used)
White Other than the above
Green Starting Communications Unit
white Other than the above
Function
Section 3-7
Condition