Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 129

Debug Console Window
Data Replay Tool
[Command log]
[Command log] | [Start]
90
Data Replay Tool reads the data in the specified input file and set them in
sequence as the virtual external input to the Ladder Engine.
Replay data
•
Output Data
•
Template
•
Pause
•
Exit
•
Status Bar
Type
•
Operation Status
•
Destination FINS
•
address for
Connection
Synchronous/
•
Asynchronous
Display
Note Refer to 8-4 Running by Virtual External Inputs for [Data Replay Tool].
Display the sub-menu of the Command Log.
Start the Command Log with the contents of the Command Log Settings. Can
not be selected when the Command Log has been started or Command Log
Settings are not set.
Display the replay file set in the [Data Replay Settings]
window.
Display the output file set in the [Data Replay Settings]
window.
Display the output template file set in the [Data Replay
Settings] window.
Pause the data replay. The button works as [Resume]
during pausing.
Exit the Data Replay Tool forcibly.
Display the type of the input data.
Display the operation status of the Data Replay Tool.
Display the destination FINS address for connection
where the data is replayed.
Display "[Synchronous]" while the synchronous replay
is performed.
Section 3-9