Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 273

I/O Memory Allocation
Address
Words Bits
A527 A52700 Online Ed-
to iting Dis-
A52707 able Bit
Validator
A52709 Online Ed-
iting Dis-
able Bit
A528 A52800 RS-232C
to Port Error
A52807 Flags
A52808 Peripheral
to Port Error
A52815 Code
A598 A59800 FPD
Teaching
Bit
234
Name
The Online Editing Disable Bit
(A52709) is valid only when this
byte contains 5A.
To disable online editing from a
Programming Device, set this
byte to 5A and turn ON A52709.
(Online editing refers to changing
or adding to the program while
the PLC is operating in
MONITOR mode.)
Turn this bit ON to disable online
editing. The setting of this bit is
valid only when A52700 to
A52707 have been set to 5A.
These flags indicate what kind of
error has occurred at the
RS-232C port; they are auto-
matically turned OFF when the
RS-232C port is restarted.
(These flags are not valid in pe-
ripheral bus mode and only bit 5
is valid in NT Link mode.)
Bits 0 and 1: Not used.
Bit 2: ON when there was a parity
error.
Bit 3: ON when there was a
framing error.
Bit 4: ON when there was an
overrun error.
Bit 5: ON when there was a
timeout error.
Bits 6 and 7: Not used.
These flags indicate what kind of
error has occurred at the periph-
eral port.
Turn this bit ON to set the moni-
toring time automatically with the
teaching function.
While A59800 is ON, FPD(269)
measures how long it takes for
the diagnostic output to go ON
after the execution condition goes
ON. If the measured time ex-
ceeds the monitoring time, the
measured time is multiplied by
1.5 and that value is stored as the
new monitoring time.
(The teaching function can be
used only when a word address
has been specified for the moni-
toring time operand.)
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
5A: Same as
A52709 CS/CJ-series
enabled PLC.
Other
value:
A52709
disabled
1: Disabled Same as
0: Not dis- CS/CJ-series
abled PLC.
See Func- Not used.
tion
column.
Not used.
1: Teach Same as
monitoring CS/CJ-series
time PLC.
0: Teaching
function off
Section 9-3
Settings
When
valid,
online ed-
iting itself
is disabled.
(Reflected
after a
password
input for
CS/CJ-seri
es PLC.)