Intended Audience; General Precautions; Safety Precautions - Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual

Safety Precautions

1

Intended Audience

2

General Precautions

WARNING
3 Safety Precautions
WARNING
Caution
Caution
xxxviii
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
Personnel in charge of installing FA systems.
Personnel in charge of designing FA systems.
Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment,
amusement machines, safety equipment, and other systems, machines, and
equipment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Unit. Be
sure to read this manual before attempting to use the Unit and keep this
manual close at hand for reference during operation.
It is extremely important that a PLC and all PLC Units be used for the speci-
fied purpose and under the specified conditions, especially in applications
that can directly or indirectly affect human life. You must consult with your
OMRON representative before applying a PLC System to the
above-mentioned applications.
The CX-Simulator simulates PLC operation. However, there are some dif-
ferences in operation and timings between those of the CX-Simulator and the
actual PLC system. Be sure to confirm operation on the actual system as well
as debugging the programs on the CX-Simulator before running the actual
system. Unexpected operation may cause an accident.
Enabling serial communications function of the CX-Simulator may affect the
operation of devices connected to the computer. When external devices are
not being used, do not enable the serial communications function. Unex-
pected operation of the external devices may cause an accident.
When the CX-Simulator is used together with the Data Link function, the
Memory Mapping function of the FinsGateway, or the Cyclic Server of the
FinsServer Series, the operation of external devices connected to the per-
sonal computer may be affected. Do not activate these functions if they do
not need to be used simultaneously. Unexpected operation of the external
devices may cause an accident.
3