Project Property Settings - Omron NS-RUNTIME - SOFTWARE User Manual

3-1-2

Project Property settings

Regarding the Project Property Dialog Box (PT Menu– Project Properties Menu), the
following settings are different from those of the NS Series.
With the NS-Runtime the Pop-Up Menu is displayed in MS Sans Serif (when the system
language is any language other than Japanese) or MS P Gothic (when the system language
is Japanese).
The relationships between font size settings with the CX-Designer and font sizes used with
the NS-Runtime are as follows.
Font size set with the CX-Designer
1 x 1
1 x 2
2 x 1
2 x 2
3 x 3
4 x 4
8 x 8
Delimiter is not shown. Therefore, there is no setting for the delimiter in the Pop-up Menu Tab
Page.
Other setting items are the same as those for the NS Series. For details on each item, refer
to the System Settings and Project Properties in the CX-Designer Online Help.
Font size displayed on the NS-Runtime
16 pt
24 pt
36 pt
60 pt
96 pt
3-1 Creating Projects
Font size (pt) corresponding to the scale
set with the CX- Designer will be shown
on the NS-Runtime.
No setting
3-3