Data Output In Bcd Or Binary (+3 To 26 Or +8 To 31) - Omron F150-3 - MANUAL 2 Operation Manual

Output Format
Word
15 to 12
+3 *000
+4 0000
+5 0000
+6 0000
+7 0000
Note For commands that are given here without responses, the
10-3-5 Data Output in BCD or Binary (+3 to 26 or +8 to
31)
306
Response
Bits
11 to 8
0000 0010
0000 0000
0000 10's digit
0000 0000
0000 0000
content of the response that is output in words +3 to +7
will be the same as for the commands in +0 to +4.
When measurement commands are executed, the results of
calculations set in Expression/Data are output. The range for
output values is –9,999,999.999 to 9,999,999.999 (after cali-
bration).
If expand command response output is OFF, the results are
output to words +3 to +26, and if it is ON, the results are out-
put to words +8 to +31.
7 to 4 3 to 0
0011
0000
1's digit
0000
0000
Section 10-3
Setting
Command code
All 0
Scene number (00 to
15)
All 0
All 0