Run Mode
Two-camera
Operation
4-2
Run Mode
4-2-1
Entering Run Mode
Note The key allocations for the Console Keys can be changed.
If the camera mode is Two-camera Switching mode, the
screens for Camera 0 and Camera 1 are displayed in order.
Example: [Judge]
All judges
/
All judges
/
Individual judge (Judge 0)
Individual judge (Judge 15)
/
Individual judge (Judge 0)
Individual judge (Judge 15)
Use Run mode to perform actual measurements.
In the following explanation, it is assumed that the key
allocations are at the default settings. If they are not, adapt
the procedure accordingly. → Page 169
Camera 0
Camera 1
Camera 0
Camera 1
Section 4-2
151