Image Data - Omron F150-3 - MANUAL 2 Operation Manual

Saving/Loading System and Scene Data
2
Move the cursor to MON or RUN and press the ENT Key.
Scn 0 ▼ ▼
MON
SET
MON
RUN
SYS
TOOL
SAVE
3
Select TOOL.
4
Select the kind of data along with the operation (load or
save).
Load system data
Save system data
Load scene data
Save scene data
Load sys+scn data
Save sys+scn data
Load image data
Save image data
5
For scene data or image data, select the corresponding
number.
Scene number (0 to 15)
6
A confirmation message will be displayed. Select Execute.
As an example, when saving system data the following
message will be displayed:
--- --- ms
Freeze
Image data (Mem 0 to 23)
Section 6-1
179