Communications Settings; Flowcharts - Omron F150-3 - MANUAL 2 Operation Manual

Communications Settings

9-1

Communications Settings

9-1-1

FlowCharts

Set Mode
Monitor
Mode
Run Mode
Note The output of data after measurement is performed in Run
232
Select Host Link for the communications mode to communi-
cate in Host Link format with a Programmable Controller or
other host device via the RS-232C port.
Command inputs cannot be received.
Command inputs can be received, but measurement results
are not output to external devices. If a command to read a set
value is input, that value will be output.
Both command input and measurement result output are sup-
ported.
mode, will continue until all of the data has been output,
even if the mode is changed. Data output will not be inter-
rupted.
Section 9-1