Camera Modes - Omron F150-3 - MANUAL 2 Operation Manual

Two-camera Unit
Camera unit
▼
Out of use
Intelligent lighting 0
Out of use ▼
Intelligent lighting 1
Out of use ▼
End
2-3-2

Camera Modes

34
3 Select Device settings.
System settings
Communications
Output
Device settings
Display
Set key operation
Switch menu
Startup mode
Error method
Version
4 Move the cursor to Camera unit and press the ENT Key.
The selections will be displayed.
:
:
:
Select F150-A20 using the Up and Down Keys, and press the
ENT Key to enter the setting.
5 Select End.
The screen for step 3 will be returned. Press the ESC Key
to return the Basic Screen shown in step 1.
When entering Set mode for the first time after the making the
settings in SYS/Device settings, the screen for selecting the
camera mode will be displayed. The menu configuration var-
ies with the camera mode selected as shown below.
Refer to the following page for details on camera modes:
→ Page 38
Refer to the following page for details on changing camera
modes after settings have been made: → Page 40
Camera unit
▼
Out of use
Intelligent lighting 0
Out of use
Out of use ▼
F150-A20
Intelligent lighting 1
Out of use ▼
End
Section 2-3
:
:
: