Table of Contents
Advertisement
OMRON
SYSMAC LINK Automatic Setup
1
Before executing the following operations, connect online to the PLC that is serving as the startup node.
2
Select Data Link | Setup from the CX-Net. (For local network only, i.e., when network address is 0.)
Clicking on this down arrow will
display the Communications
Units mounted to the PLC, as
shown below.
3
Select SYSMAC LINK, and then click the OK button.
The Datalink Component (SYSMAC LINK) window will be displayed.
4
Select Automatic Datalink Setup from the Online menu.
The Automatic Datalink (SYSMAC LINK) dialog box will be displayed.
PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Links
CX-Server PLC Tools_ Page 127
Advertisement
Chapters
Table of Contents
