Table of Contents
Advertisement
3-3 Communications Settings
3-3-3
Controller Link
Making settings for Controller Link communications.
1. Select the Controller Link in the Comm. Setting Dialog Box.
No.
1
2
3
4
5
6
7
3-12
Item
Controller Link
Network Address
Node Address
Comm. Speed
Data Link Table Setting
Read Status
Add Host
Select the Enable when communicating through the
Ethernet.
Set the Network Address to between 1 and 127.
Set the Node Address to between 1 and 32.
Set the baud rate (bps) to 500k, 1M or 2M.
Specify the data link table.
Select this option when reading the status of controller link.
Then set the read allocation address to a multiple of 16
within a range of $B0 to $B32336.
Add hosts.
Set the host name, host type, network address and node
address for hosts.
Details
1
2
3
4
5
6
7
Advertisement
Table of Contents
Troubleshooting
