Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 234

PART 1: CX-Programmer
GLOSSARY OF TERMS
Server application
Server
Signed Decimal
Slots
Symbol
Target PLC
Taskbar
Text
Transfer from PLC
Transfer to PLC
Units
Upload
Watch window
CX-Programmer _Page 154
−
CX-Programmer
An application that can be used to view or interact with.
Refer also to DDE and OLE.
1. Server is used in DDE functions to contain a link to an outside application.
Refer also to Server application.
2. A Server is the central processing point of a Network that is accessible to all
computers.
A data format supported by CX-Programmer.
Free areas within a rack to which units can be fixed.
An address that has been given a name to make the address information more flexible.
The PLC to which information or instructions are directed.
An integral part of Microsoft Windows that allows Microsoft Windows based
applications to be started. CX-Programmer is run from the Taskbar.
1. A file format supported by the CX-Programmer.
2. A data format supported by CX-Programmer.
The transfer of a program or data to a host (either a computer or a programming
device) from a lower-level (or slave) device.
The transfer of a program or data from a host (either a computer or a programming
device) to a lower-level (or slave) device.
A component of an OMRON PLC system configuration.
See Transfer from PLC.
An area of the CX-Programmer display that is reserved for monitoring PLC
addresses.
OMRON