Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 366

PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Links
Tag name
(3) <area1> <start-type>
(Link Area 1 type)
<start-ch>
(Link Area 1 start
address)
<link-
area>
(4) <area2> <start-type>
(Link Area 2 type)
<start-ch>
(Link Area 2 start
address)
<link-
area>
CX-Server PLC Tools_Page 116
Specify the area type for Link Area 1.
The beginning word for Link Area 1.
Node
Node No.
address
Link word
Link start
address
Size
Link size (Unit:
words)
Offset
Offset size
The area type for Link Area 2.
The beginning word for Link Area 2.
Node
Node No.
address
Link start Link word
address
Size (Unit:
Link size
words)
Offset
Offset size
Description
The node address for linking
at Link Area 1.
The beginning link word for
Link Area 1.
The link size for Link Area 1.
The offset size for Link Area
1.
The node address for
linking at Link Area 2.
The beginning link word for
Link Area 2.
The link size for Link Area 2.
The offset size for Link Area
2.
Set value
Same as for status area type.
Same as for status area start
address.
1 to 62
Set the link start address + link
size for the above link node.
Set any value.
Set any value. If no offset is
required, set 0.
Same as for status area type.
Same as for status area start
address.
1 to 62
Set the link start address + link
size for the above link node.
Set any value.
Set any value. If no offset is
required, set 0.
OMRON