Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 404

PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool
CX-Server PLC Tools_Page 154
5. A Comparing Dialog Box will be displayed to indicate that the comparison operation is
being executed and the comparison status will be displayed in the Log Display Area.
Note: If the read protection has been set for the connected PLC, the protection must be
cleared before the data can be compared.
Refer to Clearing UM and Task Read Protection, below, for details.
When the comparison has completed, the following dialog box will be displayed.
OMRON