Comparing Data - Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual

PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool

Comparing Data

Data in backup files can be compared with data from other backup files or data from connected PLC, and the
results shown.
Backup folder
Default name:
C\Backup\yymmdd_hhmmss
Backup files can be restored after the comparison results have been displayed. Also, the comparison results can be
saved in a CSV file.
Overview of Procedure
CX-Server PLC Tools_Page 152
PLC Backup Tool
Verify
Select PLC Backup Tool from
the Tools Menu of the
Start
CX-Programmer.
Communi- The communications settings
cations are inherited from the
settings CX-Programmer.
Verify
Select the source backup file and the destination backup file or PLC.
• Not Selecting the Units to
Compare
Check the target PLC in the Confirm Connection Dialog Box and click
Target PLC
CPU Unit + Configuration Units
(CPU Bus Units and Special I/O Units)
Select Programs – OMRON –
CX-One – CX Programmer –
PLC Backup Tool from the
Windows Start Menu.
↓
Click the Communication
Settings Button in the PLC
Backup Tool Dialog Box.
Select the PLC Direct Connection
or Connection via Gateway
Option and click the Change
Settings Button.
Set the target PLC in the Change
PLC Dialog Box.
(The PLC Backup Tool Dialog
Box will return.)
↓
Click the Compare Button.
↓
↓
• Selecting the Units to Compare
Click the Compare Button.
↓
the OK Button.
↓
Select the Units to compare in the Selects
Comparison Target Dialog Box
↓
Click the Compare Button.
↓
(Data compared.)
↓
↓
↓
↓
↓
OMRON