Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 352

PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Links
8 Set node address 02 as shown in the following table.
9 Set node address 03 as shown in the following table, and then click the Next button or press the Enter key.
Node address
PLC type
Area 1
Area 2
Ordered destination nodes
Data link status
start address
CX-Server PLC Tools_Page 102
Item
Ordered destination nodes
Status Memory area
Start address
Item
Node address
PLC type
Area 1 Memory area
Start address
Send size
Area 2 Memory area
Start address
Send size
Ordered destination nodes
Data link status Memory area
start address
Start address
Item
Memory area
Start address
Send size
Memory area
Start address
Send size
Memory area
Start address
Data set
1, 2, 3 Specifies the node refresh sequence.
Beginning with the start addresses, nodes
01, 02, and 03 are set in order. (The local
node address is 1, so transmission is first,
followed by reception from node 02, and
finally reception from node 03.)
CIO Sets CIO 1100 as the data link status start
address.
1100
Data set
2
CS1G-CPU45
CIO Sets CIO 1200 as the data link start
address for the Area 1 local node.
1200
30 Sets 30 words as the send size (unit:
words) for the Area 1 local node.
D Sets D00600 as the data link start address
for the Area 2 local node.
600
30 Sets 30 words as the send size (unit:
words) for the Area 2 local node.
1, 2, 3 Specifies the node refresh sequence.
Beginning with the start addresses, nodes
01, 02, and 03 are set in order. (Reception
from node 01 is first, followed by
transmission from the local node, and
finally reception from node 03.)
CIO Sets CIO 1300 as the data link status start
address.
1300
Data set
3
C200HX
IR Sets IR 300 as the data link start address
for the Area 1 local node.
300
40 Sets 40 words as the send size (unit:
words) for the Area 1 local node.
DM Sets DM 700 as the data link start address
for the Area 2 local node.
700
40 Sets 40 words as the send size (unit:
words) for the Area 2 local node.
2, 1, 3 Specifies the node refresh sequence.
Beginning with the start addresses, nodes
02, 01, and 03 are set in order. (Reception
from node 02 is first, followed by reception
from node 01, and finally transmission from
the local node address.)
LR Sets LR0 as the data link status start
address.
0
Description
Description
−
−
Description
−
−
OMRON