Table of Contents
Advertisement
OMRON
Import
The following paragraphs describe the methods available for importing data into a CX-Server project.
Importing from CVSS
Use the following procedure to import from CVSS.
1, 2, 3...
PLC details can be edited via the Edit pushbutton. The procedure for doing this is described in Chapter 2 -
Introduction to CX-Server Projects.
Importing from LSS
Use the following procedure to import from LSS.
1, 2, 3...
PLC details can be edited via the Edit pushbutton. The procedure for doing this is described in Chapter 2 -
Introduction to CX-Server Projects.
Importing from Text Files
Use the following procedure to import from Text.
1, 2, 3...
PLC details can be edited via the Edit pushbutton. A PLC can be added if none are suitable for the import
operation. Refer to Chapter 2 - Introduction to CX-Server Projects for further information.
Revision 2.0
1.
Select the Import CVSS button from the toolbar. A standard File Open dialog is shown;
select a CVSS file to import and select the Open pushbutton or select the Cancel
pushbutton to abort the operation. Specific CVSS file types can be selected from the
Files of Type field: either CVSS PLCs, CVSS Memory, CVSS IO Names or CVSS IO
Comments. Once the Open pushbutton has been selected, the CVSS Import Options
dialog is displayed.
2.
To import points, (i.e. any addresses and address comments contained in the selected
files) select a destination PLC from the Destination PLC field for the new addresses to
use. The device type and CPU of the currently selected PLC is shown below the
Destination PLC field. Alternatively, select a PLC from the Default Type field. Once
imported, a message is displayed indicating that conversion is complete.
Note:
The Imported Points option or the Imported PLCs option is only available if the
relevant type of object is found in the files chosen.
1.
Select the Import LSS button from the toolbar. A standard File Open dialog is shown:
select a LSS file to import and select the Open pushbutton or select the Cancel
pushbutton to abort the operation. The LSS Import Options dialog is displayed, listing
the programs detailed in the file.
2.
Select a program from the Imported Program field.
3.
Select the destination PLC from the Destination PLC field to which any addresses and
comments found in the chosen program are to be added. The type of PLC that has been
selected (device and CPU number) is shown below the drop-down list box.
4.
Once imported, a message is displayed indicating that conversion is complete.
1. Select the Import LSS button from the toolbar. A standard File Open dialog is shown:
select a text file to import and click on OK or select the Cancel pushbutton to abort the
operation. The Import Text File dialog is displayed.
2. Select a PLC for which the address definitions in the file can be linked. The PLC type that
is given in the file is shown.
3. Select a matching device type from the list of PLCs which are contained in the current
CX-Server project. This ensures that any imported addresses are valid on the chosen PLC.
Once a file has been selected, the Import Text File dialog is displayed. Once imported, a
message is displayed indicating that conversion is complete.
PART 3: CX-Server Runtime
CHAPTER 4 – Import/Export Tool
CX-Server Runtime_Page 41
Advertisement
Chapters
Table of Contents
