Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 25

Functions Supported by Unit Version for CJ2 CPU Units (CJ2H-CPU6@-EIP, CJ2H-
CPU6@)
Unit Version 1.2 or Later
Unit Version 1.1 or Later
Unit Version 1.0
CX-Programmer version 8.3 or higher must be used to enable using the
functions added for unit version 1.2.
Unit
Model
Item
EM Area force-setting/resetting
CX-Programmer version 8.1 or higher must be used to enable using the
functions added for unit version 1.1.
Unit
Model
Item
High-speed interrupt function
Decreased overhead time for interrupt tasks
Minimum interval setting of 0.1 ms for Scheduled
Interrupt Task
Changing the minimum cycle time setting in
MONITOR mode
Synchronous unit operation
All functions that are supported by unit version 4.0 or later of the CJ1 CPU
Units are supported by unit version 1.0 of the CJ2 CPU Units.
CX-Programmer version 8.0 or higher must be used to enable using unit
version 1.0 of the CJ2 CPU Units.
Unit version
Supported.
Unit version Unit version 1.1
Supported.
Supported.
Supported.
CJ2H CPU Unit
CJ2H-CPU6@-EIP
CJ2H-CPU6@
Unit version 1.2
CJ2H CPU Unit
CJ2H-CPU6@-EIP
CJ2H-CPU6@
Unit version 1.0
Not supported.
Not supported.
Not supported.
CX-Programmer_Page (
xxii
)