Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 401

OMRON
7. When the backup operation has been completed, the following Backup Completed Dialog
Box will be displayed.
8. Click the OK Button to complete the backup process.
The backup files will have been created in a folder named with the current time (yymmdd
– hhmmss) in the specified folder as shown below.
Note 1: The PLC Backup Tool will automatically create a subfolder in the folder that was
automatically created in the specified destination folder and save all of the PLC
configuration information and data in the subfolder.
Note 2: Do not change the folder structure or move files in the backup folder. If any changes are
made, it will become impossible to read the data for the comparison and restore
operations.
Note 3: If you copy the backup data to another computer, copy the entire folder named with the
current time in the destination folder, as shown below.
Example
When the Destination Folder Is C:\Backup\080131_112817 Copy the entire folder
called 080131_112817.
PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool
CX-Server PLC Tools_ Page 151