Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 487

OMRON
Exporting Data to FinsServer Files
Use the following procedure to export data to FinsServer files.
1, 2, 3...
Revision 2.0
4. Select the OK pushbutton to accept the settings. Select the Cancel pushbutton to abort the
operation. Select the Edit Project button to edit the CX-Server project's PLC. Point
definitions can also be added to the CX-Server project if desired, before export from this
function. Refer to Chapter 2 - Introduction to CX-Server Projects for further information.
Once the OK pushbutton has been selected, the Export Data File dialog is displayed. This
is a standard Microsoft Windows File Open dialog.
5. Insert a filename to export in the File name field and click on OK or select the Cancel
pushbutton to abort the operation.
6. A message is displayed in the Import/Export tool that the export is beginning. Another
message is shown indicating the success of the export. The device details of the chosen
PLC are copied to the selected file if the export is successful.
1. Select the Export to TagDB button from the toolbar. The FinsServer Export Option dialog
is displayed.
2. Select the PLC from the PLC in Project field. Details of tags, device type and network
nodes are displayed below the list box.
• + The plus icon indicates that tagged data is assigned to the PLC listed in the Node in
TagDB field.
•
- The minus icon indicates that there is no tagged data assigned to the PLC listed in
the Node in TagDB field.
3. Set the Export to same name PLC field to use the PLC in the current CX-Server project.
Deselect the Export to same name PLC field to select a specific PLC from the PLC in
Project field. If necessary, tag details can be edited via the Edit TagDB pushbutton.
Details of device type and network nodes are displayed below the drop-down list.
4. Select the Export Point pushbutton. The Export Point pushbutton is disabled if the
destination and source PLC types are different. If there are other differences (apart from
PLC type) the export can proceed but no Export Log is generated.
5. Select the Close pushbutton. The success or failure of the import operation is displayed
in the Import/Export tool status dialog. Select the OK pushbutton to proceed.
PART 3: CX-Server Runtime
CHAPTER 4 – Import/Export Tool
CX-Server Runtime_Page 43