Start-Up / Adjustment On-Site - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

Start-Up /
Program
Adjustment On-
Modification
site
Move the cursor on the
circuit you want to modify
You can use drag-and-
drop to specify more than
one circuit at the same
time
Select [Program] >
[Online Edit] > [Start]
Shortcut [Ctrl]+[E]
Move the cursor on the
contact you want to modify
and double-click
Select [Program] >
[Online Edit] > [Transfer
Change]
Shortcut
[Ctrl]+[Shift]+[E]
Unit
Parameter
Change
Online Program Modification (Online Edit)
Online Program Modification (Online Edit)
Enter the contact number you want to modify (W20.01 in a circuit example).
Double-click
Double-click