Online Connection To Plc - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

Online Debug on Reading a
a Machine
Double-click PLC
Click
(Online connection button)
If a connection cannot be established with the PLC,
If a connection cannot be established with the PLC,
you can use the automatic online connection
you can use the automatic online connection
function.
function.
Save your current project data before using this
Save your current project data before using this
function because it clears project data being edited.
function because it clears project data being edited.
When USB conversion cable (CS1W-CIF31) is used
When USB conversion cable (CS1W-CIF31) is used
for connection, specify the COM port number of the
for connection, specify the COM port number of the
USB port used.
USB port used.
(Automatic online
connection button)
Serial Port Selection Check:
[PLC] > [Automatic online
connection ] > [Serial Port
Selection]
Online
Connection
Project
to PLC

Online Connection to PLC

Online Connection to PLC
Verify that PLC model and communications setting created offline and the actual PLC are
correct.
Check PLC model.
Transferring
Program
to a
Debug
Machine
Check communications setting.
Confirm that automatic
Confirm that automatic
communication speed recognition
communication speed recognition
is checked.
is checked.