Click [OK]
Always click [OK]
4. CX-One Installation Procedure
4. CX-One Installation Procedure
Before installing the CX-One, you must:
Before installing the CX-One, you must:
•
•
terminate all Windows programs
terminate all Windows programs
•
•
Uninstall previous versions of Support Software (such as CX-Programmer) if already
Uninstall previous versions of Support Software (such as CX-Programmer) if already
installed.
installed.
•
•
Installation takes about 10 to 40 minutes depending on your personal computer. (10
Installation takes about 10 to 40 minutes depending on your personal computer. (10
minutes for a personal computer with CPU: Celeron 2.2GHz, main memory: 512MB, and
minutes for a personal computer with CPU: Celeron 2.2GHz, main memory: 512MB, and
CD-ROM drive: 48x)
CD-ROM drive: 48x)
•
•
To change/modify/delete CX-One after installation, refer to the PDF manual "CX-One
To change/modify/delete CX-One after installation, refer to the PDF manual "CX-One
Setup Manual", Chapter 2 "Installation and Uninstallation".
Setup Manual", Chapter 2 "Installation and Uninstallation".
Installing CX-One
Installing CX-One
Insert CX-One installation disk 1 (CD-ROM) into your personal computer's CD-ROM drive.
[Choose Setup Language] dialog box is displayed. By default the OS language installed on
your personal computer is automatically selected.
Check if the language is appropriate, then click the [OK] button.
The CX-One splash screen is displayed and CX-One installation starts.
Uninstall older version of tools such as PLC Tools (PLC System setting and I/O Table),
CX-Server, and CX-Programmer if they have been installed.
Uninstalling CX-Programmer
Uninstalling CX-Server