Chapter 4 Appendix 1. Personal Computer Requirements - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

1. Personal Computer Requirements
1. Personal Computer Requirements
Item
Operating System (OS)
(Note 1)
Japanese or English version
Main Unit
Memory
Hard drive
Display
Optical drive
Communication port
Others
(Note 1):
About operating System for CX-One:
This product does not run on Microsoft Windows95 or other OS versions other than the specified
System requirements.
If you have such an Operating System on a client computer, you must upgrade the Operating
System before installing this product.
Note that the required System and hard drive capacity depend on the System environment.
(Note 2):
The required memory depends on the CX-One Support Software. See the User's manual for details.
(Note 3):
An RS-232C port is required for connection with a PLC using CX-One Support Software. If you only
have USB on your personal computer, use a USB-RS-232C conversion cable (CS1W-CIF31).
*
System Requirements
Microsoft® Microsoft®
Windows® 98SE Windows® NT
(Service Pack 6a)
DOS/V (IBM AT compatible) computer with a Pentium II 333 MHz processor or higher.
Pentium III 1GHz or higher is recommended.
256MB or higher required (Note 2)
To install entire CX-One, about 1.8GB or more free space is required.
High quality display with SVGA (800 x 600) or higher and 256 colors or more.
CD-ROM drive
At least 1 RS-232C port (Note 3)
For online user registration via the Internet, you need appropriate hardware such as
modem and Internet access rights.
Microsoft® Microsoft®
Windows® 2000 Windows® XP
(Service Pack 3 or
higher)/
Windows® Me