Online Debug On A Machine; Reading A Project - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

Online Debug on Reading a
a Machine
From [File] > [Open], select
the file name "Sample1"
or
Click
Double-click the I/O
Table Unit setting
Online
Connection
Project
to PLC
This section describes connection to the machine, transfer of programs, creating Unit settings
offline, and how to debug.

Reading a Project

Reading a Project
Use CX-Programmer to read the project "Sample1" saved in the previous section.
Ladder program "Sample1" is retrieved.
In I/O Table Unit setting function, the Unit parameter setting configured in the previous
section is also retrieved.
Transferring
Program
to a
Debug
Machine