Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual page 60

Servo/Inverter
DeviceNet
Connection
Settings
Select [Settings]
Set communication
Specifications
To execute
Autodetect, select
[Settings] and define
the search conditions
Save data
RS232C
Connection
Connecting a Servo or Inverter to a Personal Computer Serially.
Connecting a Servo or Inverter to a Personal Computer Serially.
From the [Start] menu, select [Programs] > [OMRON] > [CX-One] > [CX-Drive] > [CX-Drive] to
start CX-Drive when you connect Servo or Inverter with serial connection to your computer.
Select [File] > [New] to create new data if the drive specifications are known.
If the drive is already connected, select [File] > [Autodetect] to detect the model
and specification of this connected drive.
Or, select [File] > [Autodetect] to detect the connected drive specification.
Click and save the data.