Checking I/O Assignment; Programming - Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual

Starting CX-
Design
Programmer
Double-click [ I/O Table
and Unit Setup]
Right-click
Select [Add Unit]
Click + symbol on
analog I/O
Setting
Creating Unit
CPU Bus
Configuration
Units/SIOU
Creating Unit Configuration
Creating Unit Configuration
Start the I/O Table/Unit setup function.
Double-click [ I/O
Table and Unit Setup].
Right-click Empty Slot, select [Add Unit] and determine CPU type.
Then select [General Purpose Analog I/O] from Unit selection window.
Checking I/O

Programming

Assignment
When you select [Option] > [Consumption(mA)] from
the menu, you can check the width and current
consumption after PLC Unit configuration.
(Width indication is available only for SYSMAC CJ1)
Saving
Offline Debug
a Project