Omron CX-ONE - INTRODUCTION GUIDE 1 Introduction Manual page 22

Starting CX-
Design
Programmer
Register basic I/O Unit
Check I/O assignment
Setting
Creating Unit
CPU Bus
Configuration
Units/SIOU
Checking I/O Assignment
Checking I/O Assignment
As with Analog Unit registration, register the IN and OUT Units.
By registering Units to the I/O Table, you can check I/O assignment status.
In addition, you can check addresses
assigned to actual I/O with a print out.
This I/O assignment information can also be checked by IQ indication (IN:I, OUT:Q) during
ladder programming.
Checking I/O
Programming
Assignment
In this example, CJ1W-ID211
and CJ1W-OD211 are selected
as IN and OUT Units respectively.
Saving
Offline Debug
a Project